From locating your diagnostic port to plugging in your device, OBDII GPS tracking unit installation is a quick and easy process taking less than a minute!


OBDII Installation Process

These tracking units use a trapezoidal shaped connection which plugs directly into the on board diagnostics (OBDII) port of your vehicle. This port is available in all light duty vehicles 1997+. Since one end is larger than the other, installation can only be completed one way to ensure a proper connection.

The OBDII port is typically located under the dash on the driver’s side and may be behind an easily removable panel, but it is required to be within 2 feet of the steering wheel.

Once you locate the OBDII port, simply match up the device orientation and plug it in, ensuring that it is fully and securely attached. We recommend using zip-ties to prevent devices from becoming loose.

And that’s it! Now your device’s OBDII installation is complete and can now begin tracking.

Repositioning the OBDII Port

Depending on your OBDII port location, you may feel that the unit sticks out too much. This is a simple fix with a small adjustment that will help prevent accidental (or intentional) kicking of the unit. 

Every OBDII port is connected using either two screws, one screw, or no screws at all (it pops in/out). Unscrew the OBDII port, turn it 90°, and tie it back into the vehicle with a simple twist tie. 



Please don’t hesitate to contact us if you have additional questions.

Contact Us

Send us an email message and we'll get back to you asap. It's best if you can also include your phone number